mlnxofedinstall

本文主要是介绍mlnxofedinstall，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！

find / -name mlnxofedinstall
mlnxofedinstall -h

Usage: /tmp/MLNX_OFED_LINUX-5.0-2.1.8.0-3.10.0-1127.19.1.el7.x86_64/mlnx_iso.18630/MLNX_OFED_LINUX-5.0-2.1.8.0-rhel7.8-ext/mlnxofedinstall [OPTIONS]

Installation control:
    --force              Force installation
    --tmpdir             Change tmp directory. Default: /tmp
    -k|--kernel <version>
                         Default on this system: 3.10.0-1127.19.1.el7.x86_64
    -s|--kernel-sources <path>
                         Default on this system: /lib/modules/3.10.0-1127.19.1.el7.x86_64/build
    -U|--update          Update installed version
    --with-32bit         Install 32-bit libraries. Relevant for x86_64 platforms
    --without-32bit      Skip 32-bit libraries installation (Default). Relevant for x86_64 platforms
    --distro             Set Distro name for the running OS (e.g: rhel6.5, sles11sp3). Default: Use auto-detection
    --skip-distro-check  Do not check MLNX_OFED_LINUX vs Distro matching
    --without-depcheck   Run the installation without verifying that all required Distro's packages are installed
    --check-deps-only    Check for missing required Distro's packages and exit

    --add-kernel-support
                         Add kernel support (Run mlnx_add_kernel_support.sh) and install it
    --add-kernel-support-build-only
                         Add kernel support (Run mlnx_add_kernel_support.sh) and exit

    --kmp                Install kernel RPMs with KMP support if available
                         - Enabled by default with official MLNX_OFED_LINUX releases
                         - Disabled by default if new MLNX_OFED_LINUX was created with mlnx_add_kernel_support.sh
                         - Passing it along with --add-kernel-support will pass --kmp to mlnx_add_kernel_support.sh
    --disable-kmp        Install kernel RPMs without KMP support if available
                         - Enabled by default if new MLNX_OFED_LINUX was created with mlnx_add_kernel_support.sh
    --skip-kmp-verify    Do not check if the KMP rpms are compatiable with the target kernel
    --speed-up-kmp       Speed up KMP RPMs installation by skipping %post section and running the required operations once for all KMPs

    --umad-dev-rw        Grant non root users read/write permission for umad devices instead of default
    --umad-dev-na        Prevent from non root users read/write access for umad devices. Overrides '--umad-dev-rw'
    --enable-mlnx_tune   Enable Running the mlnx_tune utility
    --enable-affinity    Run mlnx_affinity script upon boot
    --disable-affinity   Disable mlnx_affinity script (Default)
    --enable-opensm      Run opensm upon boot

    --package-install-options
                         RPM install options to use when installing RPM packages (comma separated list)
    --pre-install-<package> <path to script>
                         Run given script before given package's install
    --post-install-<package> <path to script>
                         Run given script after given package's install

Firmware update control:
    --without-fw-update  Skip firmware update
    --fw-update-only     Update firmware. Skip driver installation
    --force-fw-update    Force firmware update
    --fw-image-dir       Firmware images directory to use instead of default package content

Package selection:
    -c|--config <packages config_file>
                         Example of the config file can be found under docs
    --all                Install all available packages
    --bluefield          Install BlueField packages
    --hpc                Install minimum packages required for HPC
    --basic              Install minimum packages for basic functionality
    --dpdk               Install minimum packages required for DPDK
    --ovs-dpdk           Install DPDK and OVS packages
    --vma                Install minimum packages required for VMA
    --guest              Install minimum packages required by guest OS
    --hypervisor         Install minimum packages required by hypervisor OS
    --with-fabric-collector
                         Enable installing fabric-collector package
    --with-libdisni      Install the libdisni package - Java interface to ib_verbs
                         see https://github.com/zrlio/disni for more information
    --with-nvmf          Enable NVMEoF support
    --with-nfsrdma       Enable NFSoRDMA support
    --without-nfsrdma    Disable NFSoRDMA support (Default)

User-Space and libraries selection:
    --mlnx-libs          Install legacy libraries
    --upstream-libs      Install Upstream rdma-core-based libraries (default)
Extra package filtering:
    --kernel-only        Install kernel space packages only
    --user-space-only    Filter selected packages and install only User Space packages
    --without-<package>  Do not install package
    --with-<package>     Force installing package

Miscellaneous:
    -h|--help            Display this help message and exit
    --post-start-delay <sec>
                         Set openibd POST_START_DELAY parameter in seconds. (Default 0)
    -p|--print-available Print available packages for current platform
                         And create corresponding ofed.conf file

Output control:
    -v|-vv|-vvv          Set verbosity level
    -q                   Set quiet - no messages will be printed

这篇关于mlnxofedinstall的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！