各种实用模板或指令

2022/9/10 6:23:14

编程Tag： 指令模板实用 inline functions optimize gcc pragma mod

本文主要是介绍各种实用模板或指令，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！

1. 指令

- 网络编译

    #ifndef ONLINE_JUDGE
    freopen...
    #endif

2. 优化模板

- cin优化

std::ios::sync_with_stdio(false);

- 编译优化（火车头）

点击查看代码

# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Wattributes"
# pragma GCC diagnostic ignored "-Wpragmas"
# pragma GCC diagnostic error "-std=c++11"
# pragma GCC optimize("-fdelete-null-pointer-checks,inline-functions-called-once,-fexpensive-optimizations,-foptimize-sibling-calls,-ftree-switch-conversion,-finline-small-functions,inline-small-functions,-frerun-cse-after-loop,-fhoist-adjacent-loads,-findirect-inlining,-freorder-functions,no-stack-protector,-fpartial-inlining,-fsched-interblock,-fcse-follow-jumps,-falign-functions,-fstrict-aliasing,-fschedule-insns2,-ftree-tail-merge,inline-functions,-fschedule-insns,-freorder-blocks,-funroll-loops,-fthread-jumps,-fcrossjumping,-fcaller-saves,-fdevirtualize,-falign-labels,-falign-loops,-falign-jumps,unroll-loops,-fsched-spec,-ffast-math,Ofast,inline,-fgcse,-fgcse-lm,-fipa-sra,-ftree-pre,-ftree-vrp,-fpeephole2",3)
# pragma GCC target("avx","sse2")
# pragma GCC optimize(3)
# pragma GCC optimize("Ofast")
# pragma GCC optimize("inline")
# pragma GCC optimize("-fgcse")
# pragma GCC optimize("-fgcse-lm")
# pragma GCC optimize("-fipa-sra")
# pragma GCC optimize("-ftree-pre")
# pragma GCC optimize("-ftree-vrp")
# pragma GCC optimize("-fpeephole2")
# pragma GCC optimize("-ffast-math")
# pragma GCC optimize("-fsched-spec")
# pragma GCC optimize("unroll-loops")
# pragma GCC optimize("-falign-jumps")
# pragma GCC optimize("-falign-loops")
# pragma GCC optimize("-falign-labels")
# pragma GCC optimize("-fdevirtualize")
# pragma GCC optimize("-fcaller-saves")
# pragma GCC optimize("-fcrossjumping")
# pragma GCC optimize("-fthread-jumps")
# pragma GCC optimize("-funroll-loops")
# pragma GCC optimize("-freorder-blocks")
# pragma GCC optimize("-fschedule-insns")
# pragma GCC optimize("inline-functions")
# pragma GCC optimize("-ftree-tail-merge")
# pragma GCC optimize("-fschedule-insns2")
# pragma GCC optimize("-fstrict-aliasing")
# pragma GCC optimize("-falign-functions")
# pragma GCC optimize("-fcse-follow-jumps")
# pragma GCC optimize("-fsched-interblock")
# pragma GCC optimize("-fpartial-inlining")
# pragma GCC optimize("no-stack-protector")
# pragma GCC optimize("-freorder-functions")
# pragma GCC optimize("-findirect-inlining")
# pragma GCC optimize("-fhoist-adjacent-loads")
# pragma GCC optimize("-frerun-cse-after-loop")
# pragma GCC optimize("inline-small-functions")
# pragma GCC optimize("-finline-small-functions")
# pragma GCC optimize("-ftree-switch-conversion")
# pragma GCC optimize("-foptimize-sibling-calls")
# pragma GCC optimize("-fexpensive-optimizations")
# pragma GCC optimize("inline-functions-called-once")
# pragma GCC optimize("-fdelete-null-pointer-checks")
# pragma GCC diagnostic pop


#define Finline __inline__ __attribute__ ((always_inline))
Finline char get_char(){
    static char READBUF[200000001], *READP1 = READBUF, *READP2 = READBUF + fread(READBUF, 1, 200000000, stdin);
    return READP1 == READP2 ? EOF : *READP1 ++;
}

- O2优化

#pragma GCC optimize(2)
#pragma GCC optimize(3,"Ofast","inline")

- min函数优化

inline int min (int a, int b) {
	int c = (a - b) >> 31;
	return a ^ c | b ^ ~c;
}

- 常数优化

#define re register
#define il inline

在自定义函数前加上inline，在循环内加上register，可提升少许运行速度，例如：

il int find(int x){
    return fa[x] == x ? x : fa[x] = find(fa[x]);
}

for (re int i = a;i <= b;++ i)

- 提升效率的头部注释

freopen：

#define fin(a)  freopen (#a".in","r",stdin)
#define fout(a) freopen (#a".out","w",stdout)

循环：

#define rep(i,a,b)  for (re int i = a;i <= b;++ i)
#define Rep(i,a,b)  for (re int i = a;i < b;++ i)
#define drep(i,a,b) for (re int i = a;i >= b;-- i)

3.函数模板

- 快读快写函数

il ll read() {
    ll x = 0;
    char ch = 0;
    while(!isdigit(ch)) {
        ch = getchar();
    }
    while(isdigit(ch)) {
        x = (x << 3) + (x << 1) + (ch ^ 48);
        ch = getchar();
    }
    return x;
}

il void write(ll x) {
    if(x > 9) {
        write(x / 10);
    }
    putchar(x % 10 + '0');
}

- 幂函数

il ll Pow(ll a,ll b) {
    ll ans = 1;
    while(b) {
        if(b & 1)
            ans = ans * a % MOD;
        a = a * a % MOD;
        b >>= 1;
    }
    return ans % MOD;
}

- 组合数

il ll C(ll n,ll m) {
    if (m > n)
        return 0;
    if (m > n - m)
        m = n - m;

    ll s1 = 1,s2 = 1;
    Rep(i,0,m) {
        s1 = s1 * (n - i) % MOD;
        s2 = s2 * (i + 1) % MOD;
    }
    return s1 * Pow(s2,MOD - 2) % MOD;
}

- 卢卡斯定理

il ll Lucas (int n,int m) {
    if (!m)
        return 1;
    return C(n % MOD,m % MOD) * Lucas(n / MOD,m / MOD) % MOD;
}

这篇关于各种实用模板或指令的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！