解析c中stdout与stderr容易忽视的一些细节
2019/7/10 23:26:33
本文主要是介绍解析c中stdout与stderr容易忽视的一些细节,对大家解决编程问题具有一定的参考价值,需要的程序猿们随着小编来一起学习吧!
先看下面一个例子
a.c :
int main(int argc, char *argv[])
{
fprintf(stdout, "normal\n");
fprintf(stderr, "bad\n");
return 0;
}
$ ./a
normal
bad
$ ./a > tmp 2>&1
$ cat tmp
bad
tmp
我们看到, 重定向到一个文件后, bad 到了 normal 的前面.
原因如下:
"The stream stderr is unbuffered. The stream stdout is line-buffered when it points to a
terminal. Partial lines will not appear until fflush(3) or exit(3) is called, or a newline
is printed. This can produce unexpected results, especially with debugging output. The
buffering mode of the standard streams (or any other stream) can be changed using the
setbuf(3) or setvbuf(3) call. "
因此, 可以使用如下的代码:
int main(int argc, char *argv[])
{
fprintf(stdout, " normal\n");
fflush(stdout);
fprintf(stderr, " bad\n");
return 0;
}
这样重定向到一个文件后就正常了. 但是这种方法只适用于少量的输出, 全局的设置方法还需要用 setbuf() 或 setvbuf(), 或者采用下面的系统调用:
int main(int argc, char *argv[])
{
write(1, "normal\n", strlen("normal\n"));
write(2, "bad\n", strlen("bad\n"));
return 0;
}
但是尽量不要同时使用 文件流 和 文件描述符,
"Note that mixing use of FILEs and raw file descriptors can produce unexpected results and
should generally be avoided. A general rule is that file
descriptors are handled in the kernel, while stdio is just a library. This means for exam-
ple, that after an exec(), the child inherits all open file descriptors, but all old
streams have become inaccessible."
a.c :
复制代码 代码如下:
int main(int argc, char *argv[])
{
fprintf(stdout, "normal\n");
fprintf(stderr, "bad\n");
return 0;
}
$ ./a
normal
bad
$ ./a > tmp 2>&1
$ cat tmp
bad
tmp
我们看到, 重定向到一个文件后, bad 到了 normal 的前面.
原因如下:
复制代码 代码如下:
"The stream stderr is unbuffered. The stream stdout is line-buffered when it points to a
terminal. Partial lines will not appear until fflush(3) or exit(3) is called, or a newline
is printed. This can produce unexpected results, especially with debugging output. The
buffering mode of the standard streams (or any other stream) can be changed using the
setbuf(3) or setvbuf(3) call. "
因此, 可以使用如下的代码:
复制代码 代码如下:
int main(int argc, char *argv[])
{
fprintf(stdout, " normal\n");
fflush(stdout);
fprintf(stderr, " bad\n");
return 0;
}
这样重定向到一个文件后就正常了. 但是这种方法只适用于少量的输出, 全局的设置方法还需要用 setbuf() 或 setvbuf(), 或者采用下面的系统调用:
复制代码 代码如下:
int main(int argc, char *argv[])
{
write(1, "normal\n", strlen("normal\n"));
write(2, "bad\n", strlen("bad\n"));
return 0;
}
但是尽量不要同时使用 文件流 和 文件描述符,
复制代码 代码如下:
"Note that mixing use of FILEs and raw file descriptors can produce unexpected results and
should generally be avoided. A general rule is that file
descriptors are handled in the kernel, while stdio is just a library. This means for exam-
ple, that after an exec(), the child inherits all open file descriptors, but all old
streams have become inaccessible."
这篇关于解析c中stdout与stderr容易忽视的一些细节的文章就介绍到这儿,希望我们推荐的文章对大家有所帮助,也希望大家多多支持为之网!
- 2024-05-29Elasticsearch慢查询日志配置
- 2024-05-29揭秘华为如此多成功项目的产品关键——Charter模板
- 2024-05-29海外IDC业务拓展的7大挑战
- 2024-05-29InLine Chat功能优化对标Github Copilot,CodeGeeX带来更高效、更直观的编程体验!
- 2024-05-29CodeGeeX 智能编程助手 6 项功能升级,在Visual Studio插件市场霸榜2周!
- 2024-05-29AutoMQ 生态集成 Apache Doris
- 2024-05-292024年IDC行业的深度挖掘:机遇、挑战与未来展望
- 2024-05-29五款扩展组件齐发 —— Volcano、Keda、Crane-scheduler 等,邀你体验
- 2024-05-29AutoMQ 对象存储数据高效组织的秘密: Compaction
- 2024-05-29活动预告|来 GIAC 大会听大数据降本利器:AutoMQ 基于云原生重新设计的 Kafka